RME Audio Advanced Remote Control Guía de usuario descargar pdf (Pagina 22)

User's Guide Fireface UCX © RME

9. Operation under ASIO

9.1 General

Start the ASIO software and select ASIO Fireface USB as the audio I/O device or the audio

driver.

The Fireface UCX supports ASIO Direct Monitoring (ADM).

The Fireface UCX MIDI I/O can be used with both MME MIDI and DirectMusic MIDI.

9.2 Channel Count under ASIO

At a sample rate of 88.2 or 96 kHz, the ADAT optical input and outputs operate in S/MUX mode,

so the number of available channels is reduced from 8 to 4.

At a sample rate of 176.4 and 192 kHz, the ADAT optical input and output operates in S/MUX4

mode, so the number of available channels is limited to 2.

Note

: When changing the sample rate range between Single, Double and Quad Speed the

number of channels presented from the ASIO driver will change too. This may require a reset of

the I/O list in the audio software.

Single Speed Double Speed Quad Speed

Analog 1 to 8 Analog 1 to 8 Analog 1 to 8

SPDIF coax L / R SPDIF L / R SPDIF L / R

SPDIF opt LR / ADAT 1/2 SPDIF opt LR / ADAT 1/2 SPDIF opt LR / ADAT 1/2

ADAT 3 to 8 ADAT 3 to 4 -

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 111 112

Sin comentarios

RME Audio Advanced Remote Control Guía de usuario Pagina 22